FRP skylight tiles are lightweight and high-strength, with a density of only 1.4-1.6g/cm³ and an impact strength exceeding 120MPa, making them suitable for harsh weather conditions. Their light transmittance ranges from 50% to 85%, providing uniform, soft light and reducing glare. For example, a 1.5mm thick transparent sheet can reach 85% transmittance. They are highly chemically resistant and suitable for use in highly corrosive environments such as chemical plants and coastal areas.
FRP skylight tiles have a lifespan of 15-25 years, block over 99% of UV rays, and have a thermal conductivity as low as 0.15-0.25W/(m·K). They can reduce indoor temperatures by 3-8°C in summer, significantly saving energy. Some products are certified B1 flame retardant with an oxygen index of ≥26, ensuring safety and reliability. They offer flexible installation, can be cut and drilled, and are compatible with curved roofs. Installation efficiency is over 30% higher than glass. They are economical, costing approximately 30-80 yuan per square meter, with low maintenance costs and are environmentally friendly and recyclable.
Suitable for industrial plants, agricultural greenhouses, and other applications. For industrial plants, we recommend 1.2-2.0mm thick corrugated skylights with a light transmittance of 60%-70%. Agricultural greenhouses recommend diffuse light models to prevent plant burns. Special environments, such as chemical plants, require acid- and alkali-resistant coatings. Highly cold regions should pay attention to crack resistance at temperatures as low as -40°C.